800, 2000, 5000 sharpening stone set + guide, RISAM RW013

Product detailed description

Sharpening Stone Set with Guide - JIS #800, #2000, #5000

Sharpening Stones RISAM will breathe new life into your knives. For an affordable price, your kitchen, cooking and hunting knives will get the sharpness you've always dreamed of. They will be much sharper than when you bought the knives. Even the best knife made from the best materials will lose its original sharpness over time. Therefore, it is necessary to sharpen the knives from time to time and keep them sharp. Using the right technique and grindstones or whetstones from Dellinger will make this task easy.

RISAM grinding stones are made of high quality aluminium oxide (corundum). This material is extremely durable and sharpens to the maximum possible level. You can test the versatility of this sharpening stone not only on knives, but you can sharpen scissors, axes, razors, chisels, pocket and hunting knives. Synthetic abrasive stones are generally made of aluminum oxide. This is the same abrasive material used in oil grinding stones. The difference between the two, however, is the binder that holds the abrasive together in the stone. Water abrasive stones are softer than oil abrasive stones, allowing for faster grinding. During the grinding process, the old abrasive material is broken off and replaced with fresh sharp material. Faster grinding is clearly an advantage of water grinding stones. Another obvious advantage is the use of water rather than oil to remove metal chips from the grinding stone. However, the water grinding stone is not perfect. The softness of the grinding stone, which promotes faster grinding, results in faster wear. Wear is also uneven and requires frequent straightening of the grinding surface. For this purpose, you can find the comparison blocks in the grinding accessories section.

Accessories for grinding and maintenance of grinding stones can be found in the grinding accessories section.

Knife sharpening guide

Excellent aid for manual knife sharpening on a stone. Thanks to the guide, you maintain the same angle (approx. 15°) with each stroke and on both sides. Suitable for knives with a blade height of at least 19 mm. The white guide rollers are ceramic to ensure maximum guide life.

#ShowMore#

Instructions for using the sharpening guide

Attach the guide to the sharpened part of the blade. Holding the guide with one hand and the knife handle with the other, the ceramic part touches the surface of the grinding stone or diamond sharpener. Move the knife back and forth across the stone using a little pressure - then turn the knife and repeat the previous procedure. Move the guide along the entire length of the blade and repeat the process. After sharpening, clean the knife with a damp cloth or water and then dry it. Clean the surface of the leash with water and a soft brush.

Maintenance and cleaning of the sharpening guide

Do not wash the leash in the dishwasher. If the guide is contaminated with metal particles, remove it with a sponge under running water. Baking soda on a sponge can be used (detergent is not recommended). After washing, dry the leash thoroughly. Keep the leash and sharpened blades out of the reach of children to prevent unnecessary accidents.

Knife sharpening course

We regularly hold knife sharpening courses for beginners, where we teach you how to sharpen stones using the traditional Japanese method.