Tosa-Ichi Bright "Tsuchime Bright"
Hokiyama Tosa-Ichi Tsuchime Bright – Japanese knives made from Aogami Super
Japanese kitchen knives with a hard Aogami Super carbon steel cutting core, protective outer layers and a distinctive hammered Tsuchime finish.
Hokiyama Tosa-Ichi Tsuchime Bright is a series of Japanese kitchen knives designed for cooks who are looking for a very fine edge, high hardness and precise control when cutting. At the heart of the blade is Aogami Super, also known as Blue Super Steel – a high-carbon Japanese steel that allows an exceptionally fine edge to be created and, with proper care, retained for a long time.
The blades have a three-layer construction. The hard Aogami Super core is protected on both sides by more corrosion-resistant SUS405 steel. However, the cutting core itself remains exposed at the edge, so it requires proper care and immediate drying after use.
Another distinctive feature of the series is the Tsuchime hammered finish. It gives the blade a characteristic appearance and can also help reduce full contact between certain foods and the blade surface.
#ShowMore#
Why choose Tosa-Ichi Tsuchime Bright?
Aogami Super
Hard Japanese carbon steel suitable for a very fine and precise edge with good edge retention.
Approximately 63 HRC
High hardness supports long edge retention, but it also requires proper cutting technique and careful handling.
Tsuchime finish
The hammered texture gives the blade its distinctive appearance and can help reduce food sticking in some cases.
Japanese construction
The series combines a hard cutting core with protective outer layers and practical blade shapes for precise kitchen work.
Aogami Super – what makes this steel special?
Aogami Super belongs to the group of high-carbon Japanese steels. Its main advantage is its ability to reach high hardness and support a very fine edge geometry.
In Tosa-Ichi Tsuchime Bright knives, the hardness is approximately 63 HRC. With proper use, the edge can therefore remain sharp for a long time. At the same time, a very hard edge is not designed for rough handling, prying or chopping hard bones or frozen food.
More information about this group of steels is available on the Aogami / Blue Steel page.
Aogami Super is not fully stainless steel
The outer layers help protect the sides of the blade from corrosion, but the Aogami Super cutting core is exposed at the edge. Always hand wash the knife after use, dry it immediately and do not leave it in a damp environment for extended periods.
Petty or Gyuto/Kiritsuke?
| Model | Use | Who we recommend it for |
|---|---|---|
| Petty 135 mm | Fruit, smaller vegetables, precise cuts, trimming and smaller kitchen tasks | As an agile companion to a larger chef's knife |
| Gyuto/Kiritsuke 210 mm | Vegetables, fruit, boneless meat, fish, herbs and general kitchen work | For users looking for one main Japanese chef's knife |
| Gyuto/Kiritsuke Red 210 mm | The same versatile use with a different colour design | For cooks who prefer a more distinctive handle design |
Petty 135 mm – precision in a compact format
Petty is a smaller versatile Japanese knife suitable for tasks where a large chef's knife would be unnecessarily long. It works well for fruit, smaller vegetables, trimming ingredients and other precise tasks.
View the Hokiyama Tosa-Ichi Tsuchime Bright Petty 135 mm.
Gyuto/Kiritsuke – the versatile main knife
Gyuto/Kiritsuke combines the versatility of a chef's knife with the more pronounced tip of a Kiritsuke-style blade. It is suitable for vegetables, fruit, boneless meat and fish, and its blade length also makes it practical for larger ingredients.
You can currently choose between the classic Tsuchime Bright Gyuto/Kiritsuke 210 mm and the more distinctive Tsuchime Bright Red Gyuto/Kiritsuke 210 mm.
What does Tsuchime mean?
Tsuchime refers to the hammered texture on the surface of the blade. It creates the characteristic irregular relief that distinguishes these knives from conventionally smooth-finished blades.
In addition to its appearance, the textured surface can help reduce contact between some foods and the blade while cutting. This does not mean that food will never stick to the knife – it also depends on the ingredient, moisture, thickness of the cut and cutting technique.
How should you care for Aogami Super?
- hand wash and immediately dry the knife after use,
- never leave it in water or a damp sink for extended periods,
- do not use a dishwasher,
- cut on a wooden or high-quality plastic cutting board,
- avoid glass, stone, ceramic and metal surfaces,
- do not chop hard bones or frozen food,
- during longer periods of storage, the exposed carbon-steel part of the blade can be lightly treated with a suitable oil.
For safe storage, we recommend a knife sheath or blade guard.
How to sharpen Tosa-Ichi Tsuchime Bright?
Hard Aogami Super steel responds well to quality water sharpening stones. When restoring the edge, it is important to maintain a stable angle and avoid removing more material than necessary.
If you do not have experience sharpening very hard Japanese knives, it is better to start with an edge that is only lightly dulled or use professional sharpening. A major angle error or an overly aggressive method can damage the fine edge geometry.
You can find suitable equipment in the knife sharpening category.
Who is Tsuchime Bright suitable for?
I would recommend this series mainly to cooks who already know that they want a harder Japanese edge and are willing to give the knife a little more care. The reward is a very precise cut and the distinctive character of Aogami Super, which differs significantly from ordinary stainless European knives.
Not sure which model to choose?
We will be happy to help according to your hand size, cutting style and the ingredients you prepare most often. Call +420 702 049 048, Mon–Fri 7:30–16:00, or email info@dellinger.cz.
Frequently asked questions
What steel are Tosa-Ichi Tsuchime Bright knives made from?
The cutting core is made from Japanese Aogami Super carbon steel. It is protected on both sides by two more corrosion-resistant layers of SUS405 steel.
How hard is Aogami Super in this series?
The current Tosa-Ichi Tsuchime Bright models are specified at approximately 63 HRC.
Is Aogami Super stainless steel?
No. Aogami Super is a high-carbon steel. The sides of the blade are protected by more corrosion-resistant layers, but the core is exposed at the edge and requires careful drying.
What does Tsuchime mean?
Tsuchime is a hammered surface texture on the blade. It creates a distinctive appearance and can help reduce contact between some foods and the blade surface.
Which model should I choose as my main kitchen knife?
Gyuto/Kiritsuke is more suitable for versatile use. It can handle vegetables, fruit, boneless meat, fish and other everyday kitchen tasks.
What is the Petty 135 mm used for?
Petty is a smaller versatile knife suitable for fruit, smaller vegetables, trimming and precise tasks where a large chef's knife would be unnecessarily long.
Can these knives be washed in a dishwasher?
No. We recommend hand washing only and immediate drying. A dishwasher can damage the fine edge and handle and can encourage corrosion on the exposed carbon steel.
Can I chop bones with the Gyuto/Kiritsuke?
No. The hard and fine edge is not designed for chopping hard bones, joints or frozen food. Chipping or other edge damage may occur.
What cutting board is suitable?
We recommend a wooden or high-quality plastic cutting board. Glass, stone and ceramic surfaces can quickly dull or damage the fine edge.
How are Aogami Super knives sharpened?
Quality water sharpening stones are suitable for maintenance. It is important to maintain a stable angle and work carefully with respect to the very hard and fine edge.
