Glass stone holder
Code: SHA-50200Product detailed description
A stable base for precise hand sharpening
A robust Japanese holder for comfortable and stable sharpening with SHAPTON GlassStone stones and other sharpening stones measuring 210 mm in length.
SHAPTON GlassStone sharpening-stone holder creates a stable working base for precise hand sharpening of knives. It securely holds the stone, raises it above the worktop and helps prevent unwanted movement during use.
The elevated working position provides more room for your hands, preventing your knuckles from touching the worktop while guiding the knife. This makes sharpening more comfortable, smoother and easier to control, especially during longer sessions or progressive sharpening with several grits.
The holder is designed primarily for SHAPTON GlassStone sharpening stones measuring 210 mm in length. It can also be used with other suitable stones of the same length, provided their shape and dimensions allow them to be positioned safely.
Notice: The sharpening stone is not included.
#ShowMore#
Why use a stable sharpening-stone holder?
Secure stone positioning
The holder grips the stone and helps prevent it from moving while the blade is guided across it. A stable stone makes it easier to maintain the selected angle and improves control over the entire sharpening movement.
More room for your hands
Raising the stone above the worktop creates room for comfortable hand movement. Your knuckles do not touch the surface during sharpening, allowing the knife to move more smoothly along the full length of the edge.
High stability
The robust construction, high weight and non-slip rubber feet help keep the holder in place, even during longer sharpening sessions.
Quick stone replacement
When sharpening with several grits, the individual stones can be replaced progressively without having to prepare a new working base each time.
Which stones is the holder designed for?
The holder was developed for the SHAPTON GlassStone range of sharpening stones. Its length corresponds to stones with a total length of 210 mm, which can be inserted quickly and conveniently.
It may also be used with stones from other manufacturers, provided they have the corresponding length and can be positioned firmly and safely in the holder. Before sharpening, always check that the stone does not move inside the holder.
Important notice
The holder is supplied without a sharpening stone. SHAPTON GlassStone stones and other sharpening accessories must be ordered separately.
How to use the holder correctly
- Place the holder on a flat, solid and clean working surface.
- Check that the rubber feet make full contact with the surface and that there is no debris underneath the holder.
- Insert a sharpening stone of the appropriate length into the prepared recess.
- Before sharpening, make sure the stone is firmly seated and cannot move.
- Prepare the sharpening surface with water according to the instructions provided by the manufacturer of the specific stone.
- Guide the knife evenly, at a constant angle and without unnecessarily high pressure.
- After sharpening, remove the stone, rinse away the working residue and dry the holder.
Who is the holder suitable for?
- owners of SHAPTON GlassStone sharpening stones,
- home users who want a more stable working base,
- enthusiasts using several progressive grits,
- professional chefs and experienced sharpeners,
- users who find sharpening directly on a low base uncomfortable,
- sharpening stones approximately 210 mm long, provided they can be positioned safely.
Who is it not suitable for?
The holder is not suitable for stones that do not fit its dimensions or cannot be secured safely inside it. It is also not intended as a universal working base for stones of arbitrary sizes.
Technical specifications
| Brand | SHAPTON |
|---|---|
| Product line | GlassStone |
| Product type | Sharpening-stone holder |
| Dimensions | 259 × 86 × 56 mm |
| Recommended stone length | 210 mm |
| Non-slip elements | Rubber feet |
| Product code | SHA-50200 |
| EAN | 4944509502008 |
| Country of manufacture | Japan |
| Sharpening stone included | No |
Cleaning and maintaining the holder
Sharpening creates a mixture of water, released abrasive and steel particles. After finishing, remove the stone and clean the holder with a soft damp cloth or a gentle sponge.
- Remove water and sharpening slurry after every sharpening session.
- Dry the holder after cleaning.
- Regularly check that the rubber feet are clean.
- Do not use aggressive chemical or abrasive cleaning products.
- Protect the holder from drops and strong impacts.
- Store it in a dry place.
Recommended with the holder
SHAPTON GlassStone sharpening stones
Choose the appropriate grit for edge repair, regular sharpening, refinement or final polishing.
View SHAPTON GlassStone ›Set of #1000, #3000 and #8000 stones
Three progressive grits for creating a working edge, refining it and achieving a very fine final finish.
View the complete set ›Knife-sharpening course
Learn how to maintain the correct angle, raise a burr and progress safely between individual grits.
View the sharpening course ›Need to verify stone compatibility?
Contact us at +420 702 049 048, Monday to Friday between 7:30–16:00. We will help you verify whether the holder is suitable for your sharpening stone.
Frequently asked questions
Is a sharpening stone included?
No. The package contains only the holder. The sharpening stone must be ordered separately.
Which stones is the holder designed for?
It is designed primarily for SHAPTON GlassStone sharpening stones measuring 210 mm in length.
Can a stone from another brand also be used?
Yes, provided it has the corresponding length and can be positioned firmly and safely in the holder. We recommend checking compatibility before purchase.
Why is the holder so tall?
Its height of 56 mm raises the stone above the worktop and creates more room for your hands and knuckles while guiding the knife.
Will the holder slide during sharpening?
The robust construction and non-slip rubber feet help keep the product in place. However, always use it on a clean and level surface.
Is the holder suitable for a beginner?
Yes. A stable working base can make it easier for a beginner to guide the knife and maintain the selected sharpening angle.
What are the holder’s dimensions?
The holder measures 259 × 86 × 56 mm.
How is the holder cleaned?
After sharpening, remove the stone, clear away water and sharpening slurry, clean the holder with a damp cloth and then dry it.
Additional parameters
| Category: | Shapton Glass – Stones on Glass Base |
|---|---|
| Warranty: | 2 years |
| Weight: | 1.94 kg |
| EAN: | 4944509502008 |
| production: | Japan |
SHAPTON – Japanese specialist in sharpening stones
SHAPTON Co., Ltd. is a Japanese manufacturer of synthetic sharpening stones and accessories for precise edge maintenance. The brand is known for fast abrasive action, a stable structure and a wide choice of grits for kitchen knives and craft tools.
SHAPTON is based in the town of Mashiko in Japan’s Tochigi Prefecture. The company focuses on developing sharpening stones that allow fast, controlled and highly repeatable edge work. Its products are used by professional sharpeners, chefs, craftspeople and home users who want to maintain their knives by hand.
SHAPTON sharpening stones feature a high concentration of abrasive particles and a carefully designed bonding system. This allows them to remove material efficiently, provide clear feedback during sharpening and wear more slowly than many softer stones. The wide grit range makes it possible to repair a damaged edge, create a new bevel, restore ordinary working sharpness and carry out extremely fine final polishing.
You can find the complete selection in the SHAPTON sharpening stones category.
Why are SHAPTON stones so popular?
Fast abrasive action
The high abrasive content makes it possible to restore the bevel effectively even on harder modern steels. With correct technique, there is therefore no need to apply heavy pressure to the blade.
No long soaking required
SHAPTON stones are designed for quick preparation. Before sharpening, the surface is usually only moistened with water, allowing you to start working without a long wait.
Lower wear
The optimised bonding system helps use the abrasive particles more efficiently. The stones therefore retain their working properties for a relatively long time, although their flatness still needs to be checked regularly.
Wide range of grits
From coarse repair stones to extremely fine polishing stones. Users can create a progressive sharpening sequence according to the condition of the knife, the steel used and the desired result.
Main SHAPTON sharpening-stone ranges
SHAPTON Kuromaku
Kuromaku is the classic range of solid synthetic sharpening stones. Individual grits are colour-coded, making it easier to distinguish between multiple stones while working. Each stone comes with a practical plastic case that can also be used as a base during sharpening.
SHAPTON GlassStone
The GlassStone range uses a thin abrasive layer firmly bonded to a glass base. The glass support provides dimensional stability and makes even a thin abrasive layer easier to handle. The extensive grit selection allows users to build a progression from basic sharpening to an exceptionally fine finish.
SHAPTON RockStar
RockStar is a modern premium range combining strong abrasive performance, a uniform structure and a finely controlled result. It is also designed for hard blades and users who want fast work without long soaking.
Which SHAPTON grit should you choose?
The brand or product range itself does not influence the result as much as choosing the correct grit. A coarse stone removes steel quickly, while a fine stone smooths the marks left by previous sharpening and refines the finished edge.
| Grit | Suitable use | Who it is suitable for |
|---|---|---|
| #120–#500 | Repairing a damaged edge, changing the bevel and working on a very dull knife. | More experienced users and repair sharpening. |
| #1000 | Restoring ordinary working sharpness and creating a new cutting edge. | The best first stone for most kitchen knives. |
| #1500–#3000 | Smoothing the bevel and providing a finer finish after basic sharpening. | Home cooks and more demanding users. |
| #4000–#8000 | Fine finishing and polishing of high-quality kitchen knives. | Japanese knives and blades requiring a smooth finish. |
| #12000–#16000 | Extremely fine specialised polishing after the previous stages. | Experienced sharpeners and specific edge-surface requirements. |
A simple recommendation for beginners
When buying your first sharpening stone, begin with #1000 grit. Add a #3000 stone for a finer finish. A coarse stone around #320 or #500 makes sense when the edge is damaged or significantly dull.
Maintaining SHAPTON sharpening stones
During sharpening, the working surface of every water stone gradually wears and may become hollow in the centre. An uneven stone makes it harder to control the angle and can result in an irregular bevel. It is therefore important to clean the surface continuously and flatten it when necessary.
- Moisten the stone before use according to the instructions for the specific range.
- Keep sufficient water on the surface while sharpening.
- Remove sharpening slurry and metal particles after use.
- Check the flatness of the working surface regularly.
- Allow the stone to dry naturally away from direct heat.
- Store the dry stone so that it cannot fall or suffer mechanical damage.
Holders, lapping tools, cleaning discs and other equipment can be found in the sharpening accessories category.
Would you like to learn how to sharpen correctly?
A high-quality sharpening stone is only part of the solution. Maintaining a stable angle, creating a burr, applying pressure correctly and progressing through the individual grits are equally important.
View the knife-sharpening course ›Frequently asked questions about SHAPTON
Where does the SHAPTON brand come from?
SHAPTON is a Japanese company based in the town of Mashiko in Tochigi Prefecture, Japan.
What makes SHAPTON sharpening stones special?
They stand out for their fast abrasive action, high abrasive content, good dimensional stability and wide choice of grits.
Do SHAPTON stones require long soaking?
Usually not. SHAPTON stones are designed for quick use after the surface has been moistened with water. Always follow the instructions for the specific product.
Which SHAPTON stone should I choose first?
For ordinary kitchen knives, #1000 is the most universal grit. It restores the working edge without removing material as aggressively as repair stones.
What is the difference between Kuromaku, GlassStone and RockStar?
Kuromaku stones are classic solid, colour-coded stones in a case. GlassStone uses an abrasive layer on a glass base. RockStar is a modern premium range with fast and even abrasive action.
Are SHAPTON stones suitable for hard Japanese steels?
Yes. A correctly selected SHAPTON stone can also be used on many hard Japanese steels. The appropriate grit, a stable angle and moderate pressure are decisive.
Can tools also be sharpened on SHAPTON stones?
Yes. Depending on the chosen range and grit, they can also be used to sharpen chisels, plane irons and other cutting tools.
Why does a sharpening stone need to be flattened?
The stone may wear unevenly during use. A flat surface improves angle control, blade contact and the consistency of the finished bevel.
Need help choosing?
We will help you select a suitable SHAPTON range and progressive grits according to the knife type, condition of the edge and your experience. Contact Dellinger on +420 702 049 048 on working days between 7:30–16:00.
| EU representative of the manufacturer : | Dellinger s.r.o. |
|---|---|
| Address of the EU representative : | Rižská 1580/7 102 00 Praha |
| Email of the EU representative : | saleseu@dellinger.cz |